View A050FW01V5_3488645.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

version: 0.2 page: 0/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. doc. version 0.2 total page 15 date 2008/06/30 product specification 5" color tft-lcd module model name: a050fw01 v5 < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2 0 0 8 au o ptr oni c s al l ri ghts re s e r ve d. do no t co p y www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 1/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. record of revision version revise date page content 0.0 01/10/2008 first draft. 0.1 2008/03/13 10 12 response time(30ms) and viewing angle(l/r 70/70) low temperature storage(-3 0 ) and operation(-2 0 ) 0.2 2008/06/30 14 drawing update www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 2/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. contents a. physical specifications ......................... ................................................... ...3 b. electrical specifications....................... ................................................... 4 1. fpc p in a ssignment .....................................................................................................................4 c onnector : fh12-50s-0.5sh ..........................................................................................................4 2. a bsolute m aximum r atings .......................................................................................................6 c. electrical characteristics ...................... .............................................6 1. tft- lcd t ypical o peration c ondition .................................................................................6 2. b acklight d riving c onditions .................................................................................................6 3. s uggested a pplication c ircuit ................................................................................................7 3.1 s uggested a pplication c ircuit ..............................................................................................7 4. ac t iming .......................................................................................................................................8 4.1 t iming d iagram 8 4.2 t iming c ondition 8 5. p ower o n /o ff s equence .............................................................................................................9 d. optical specification........................... ................................................... ....10 e. reliability test items:......................... ................................................... ....12 f. packing form.................................... ................................................... ...............13 g. outline drawing: ................................. ................................................... ........14 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 3/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. a. physical specifications no. item specification remark 1 display resolution (dot) 480rgb (h) x 272 (v) 2 active area (mm) 109.44 (h) x 62.016 (v) 3 screen size (inch) 4.95? (diagonal) 4 dot pitch (mm) 0.076 (h) x 0.228 (v) 5 color configuration r. g. b. stripe note 1 6 color depth 16.7m colors note 2 7 overall dimension (mm) 120.7 (h) x 75.8 (v) x 3 .11 (t) note 3 8 weight (g) tbd 9 display mode normally white 10 gray level inversion 6 o?clock note 1: below figure shows dot stripe arrangement. note 2: full color display depends on 8-bit data signal (pin 5~28). note 3: not including fpc. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 4/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. b. electrical specifications 1. fpc pin assignment connector: fh12-50s-0.5sh pin no. symbol type description remark 1 gnd p ground 2 gnd p ground 3 vdd p power supply 4 vdd p power supply 5 r0 i red data (lsb) 6 r1 i red data 7 r2 i red data 8 r3 i red data 9 r4 i red data 10 r5 i red data 11 r6 i red data 12 r7 i red data (msb) 13 g0 i green data (lsb) 14 g1 i green data 15 g2 i green data 16 g3 i green data 17 g4 i green data 18 g5 i green data 19 g6 i green data 20 g7 i green data (msb) 21 b0 i blue data (lsb) 22 b1 i blue data 23 b2 i blue data 24 b3 i blue data 25 b4 i blue data 26 b5 i blue data 27 b6 i blue data www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 5/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. 28 b7 i blue data (msb) 29 gnd p ground 30 dclk i pixel clock note 2 31 disp i disp : ?l? display off disp : ?h? display on note 2 32 nc none connect 33 nc none connect 34 de i data enable note 2 35 u/d i shift up or down control note 3 36 nc none connect 37 gnd p ground 38 gnd p ground 39 nc not connected 40 nc not connected 41 nc not connected 42 nc not connected 43 gnd p ground 44 gnd p ground 45 gnd p ground 46 vled- p led cathode 47 vled+ p led anode 48 gnd p ground 49 gnd p ground 50 gnd p ground note 1: i: input; o: output; p: power. note 2: for correct power on sequence please refer to sec tion 5 ?power on/off sequence? note 3: u/d=?h? displays up to down and left to right . u/d=?l? displays down to up and right to left. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.2 page: 6/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. 2. absolute maximum ratings item symbol min. max. unit remark power voltage vdd -0.3 4.5 v note 1 input signal voltage vi -0.3 vdd+ 0.3 v note 1: functional operation should be restricted unde r normal ambient temperature. c. electrical characteristics the following items are measured under stable condi tion and suggested application circuit. 1. tft- lcd typical operation condition item symbol min. typ. max. unit remark power supply vdd 3.1 3.3 3.5 v input high voltage vh 0.7*vdd - vdd v input low voltage vl 0 - 0.3*vdd vertical cycle f v - 59.94 - hz horizontal cycle f h - 17.14 - khz dot frequency f dclk - 9.0 15.0 mhz 2. backlight driving conditions parameter symbol min. typ. max. unit remark led current i l - 20 - ma single serial led voltage v l - 23.1 - v single serial led life time l l - - - hr note 2, 3 note 1: led backlight is 14 leds. 2 3 . 1 v note 2 :define ?led lifetime?: brightness is decreased to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperature = 25 and led current = 20ma. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 7/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. note 3: if it uses larger led current il more than 20 ma, it maybe decreases the led lifetime. 3. suggested application circuit 3.1 suggested application circuit note: resisters = 120ohm www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 8/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. 4. ac timing 4.1 timing diagram 4.1.1 vertical timing of input 4.1.2 horizontal timing of input invalid data invalid data 2 1 3 4 479 480 2 1 3 4 // // // // dclk de dn7~dn0 th thd thb // 4.2 timing condition 4.2.1. timing parameters parameter symbol min typ max unit clock cycle 1/tc - 9 15 mhz horizontal cycle 1/fh - 17.14 - khz vertical cycle 1/fv - 59.94 - hz horizontal signal horizontal cycle *1 th - 525 - dclk horizontal display period thd - 480 - dclk horizontal blank thb - 45 - dclk vertical signal vertical cycle tv - 286 - h vertical display period tvd - 272 - h vertical blank tvb - 14 - h www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 9/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. 5. power on/off sequence a. the lcd apopts high voltage driver ic, so it could be permanently damaged under a wrong power on/off sequence. the suggested lcd power sequence i s below: power on sequence: vdd dclk disp led unit. power off sequence: led unit disp dclk vdd. b. signals dclk, disp and de must be pulled low at p ower on. any power on glitches at these signal can cause abnormal display. below is an example o f de signal demonstrating a signal glitch power on and a correct signal power on. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 10/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. d. optical specification item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 - - 7 23 - - ms ms note 4 , 5 contrast ratio cr at optimized viewing - 300 - note 6, 7 viewing angle top bottom left right cr 10 R - - - - 40 60 70 70 - - - deg. note 8 brightness y l =0 420 500 - cd/m 2 note 9 x =0 0.26 0.31 0.36 white chromaticity y =0 0.28 0.33 0.38 note 1: measurement is in the dark room, optical ambie nt temperature =25 , and backlight current il=20 ma note 2: to be measured in the dark room. note 3:to be measured on the center area of panel wit h a field angle of 1by topcon luminance meter bm-7, after 10 minutes operation. note 4: definition of response time: the output signals of photo detector are measured when the input signals are changed from ?black? to ?white?(falling time) and from ?white? to ?black?(rising time), respectively. note 5. from liquid crystal characteristics, response time will become slower and the color of panel will become darker when ambient temperature is below 25 . note 6. definition of contrast ratio: photo detector output when lcd is at ?white? state photo detector output when lcd is at ?black? state note 7. white vi=vi50 1.5v black vi=vi50 2.0v ?? means that the analog input signal swings in phase with com signal. ? ? means that the analog input signal swings out of pha se with com signal. vi50 : the analog input voltage when transmission is 5 0% the 100% transmission is defined as the transmission of lc d panel when all the input terminals of module are electrically opened. contrastratio (cr)= www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 11/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. note 8. definition of viewing angle: refer to figur e as below. note 9. measured at the center area of the panel when all the input terminals of lcd panel are electrically opened. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 12/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. e. reliability test items: no. test items conditions remark 1 high temperature storage ta= 80 240hrs 2 low temperature storage ta= -30 240hrs 3 high ttemperature operation tp= 70 240hrs 4 low temperature operation ta= -2 0 240hrs 5 high temperature & high tp= 6 0 , 90% rh 240hrs operation 6 heat shock - 1 0 ~ 7 0 / 5 0 cycles 2 hrs/cy cle 7 electrostatic discharge 200v,200pf(0 ? ), once for each terminal frequency range 10~55hz stoke 1.5mm sweep 10~55~10hz 2 hours for each direction of x,y,z 8 vibration ta= 25 non-operation jis c7021, a-10 condition a 2 hours for each direction of x,y,z (6 hours for total) 9 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 10 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz ?6db/octave from 200~500hz iec 68-34 11 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces note 1: ta: ambient temperature. note 2: squarely inspect all lcd function before and a fter ambient environment test. note 3: in the standard conditions, there is not display function ng issue occurred. all the cosmetic specification is judged before the reliability st ress. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 13/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without p ermission from au optronics corp. f. packing form 6 pcs/tray www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.1 page: 14/15 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. g. outline drawing: www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A050FW01V5

	To Download A050FW01V5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .